- ECU chip tuning (47)
- Car Diagnostic Tool (132)
- ELM327 scanner (25)
- Obdii Code Scanner (7)
- Handheld device/scanner (38)
- launch x431 (18)
- Odometer Correction Tool (15)
- car key programmer (27)
- MB / BMW diagnostic tool (36)
- obdii cable / connector (53)
- Motorcycle Diagnostic tools / Scanners (14)
- Truck Diagnose tool (36)
- remote car key and transponder (45)
- blog for obdii tool (6)
- vag com 15.7.1 (0)
No. of Employees : 50~100
ELM327 USB with FTDI232RL 115200 speed with switch
|Place of Origin:||China|
|Model Number:||ELM327 USB with switch FTDI|
|Minimum Order Quantity:||1PC|
|Packaging Details:||well packed|
|Payment Terms:||bank, paypal, WU|
ELM327 USB with FTDI232RL 115200 speed With Switch For Forscan software
•Latest ELM327 version for greater ford compatibility
•Manufactured modification to include a switch to connect to different CAN buses
•Designed for FORScan software
•Compatible with software venders; FORScan, Elmconfig, FF2 and FoCCCus, plus more
•MS CAN bus and HS CAN bus support
•Drivers and instructions included
One ELM327 OBDII OBD2 USB with switch. Designed for communicating with Ford, Mazda, Lincoln and Mercury vehicles. With this cable and the one of the supported software vendors you can detected modules which are not visible for regular
OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327.
Reset fault /trouble codes / parameter ids (PIDs)
Change car configuration data
Program certain models
Switch position one: HS CAN - Occupies pins 6 and 14
Switch position two: MS CAN - Occupies pins 3 and 11
Please note that many Ford and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN
is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.
ELM327 supports HS CAN from the stock, because Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.
All Ford, Mazda, Lincoln, Mercury vehicles that can be addressed using an ELM via an OBDII connector.
FORD HS CAN
FORD MS CAN
Cables fully tested on supported model before shipping.
No responsibility can be accepted for any damage caused by the lead.
ELM327 USB FTDI with Switch PCB board: